Luxtronic Lighting Limited
LUXTRONIC LIGHTING LIMITED LED High Bay Lights Manufacturer Since 2011 ISO9001:2008
Add to Cart
1000LM Solar PIR Security Light IP65 226M Wall Security Lamp by Microwave Radar
Specifications:
1. 48 LED Solar Light: equipped with 48 super bright LED lights, it provides excellent illumination of up to 900 lumens,
which is far brighter than other similar LED solar lights.
2. Solar Panel IP65 Waterproof Solar Lights: With solar panel, it can convert up to 17% of the sunlight into electricity energy.
Made of durable ABS material, you don't need to worry about use in the rain. It can also withstand all kinds of severe weather conditions.
3.4 Lighting Modes: 4 lighting modes at your option, you can choose any of them at your needs.
Dim light sensor mode; Sensor mode; Medium light mode; Emergency light.
Working modes:
1.body sensor+micro-mode:when someone comes,the light will strong,when no one comes,the light will be bright slightly.
2.human body induction mode:when someone comes,the light will strong,when no one comes, the light will turn off
3.always light mode:it will always light at night,no induction function
4.emergency light mode:it will be strong light for 30 minutes,and then turn off the light,the solar panel will time again after sensing the light.
| 24LED | · Solar panel:5V,1.5W · Lithium battery:3.2V,1500mAh · Maximum lumen:450LM · Charging time:6hours · Working time:depends on which mode on,more than 500times sensor after fully charged,keep 10 hours at mode 3(about half of strong lighting) · Sensing distance:5-10M/16.4ft |
| 48LED | · Solar panel:5V,3.2W · Lithium battery:3.2V,3000mAh · Maximum lumen:900LM · Charging time:6hours · Working time:depends on which mode on,more than 500 times sensor after fully charged,keep 10 hours at mode 3(about half of strong lighting) · Sensing distance:5-10M/16.4ft |
| 60LED | · Solar panel:5V,4.2W · Lithium battery:3.2V,6000mAh · Maximum lumen:1100LM · Charging time:6hours · Working time:depends on which mode on,more than 500times sensor after fully charged,keep 10 hours at mode 3(about half of strong lighting) · Sensing distance:5-10M/16.4ft |
How to use:
Power on:press and hold the switch for 5-10 seconds to enter the first mode.
Each press on button would change a light mode,switch circularly.
1.Body sensor+micro-mode:dim, full bright for 15 seconds when motion detected.
2.Human body induction mode:off, full bright for 15 seconds when motion detected.
3.Always light mode:it will always light at night,no induction function.
4.Emergency light mode:manual,full bright for 30 minutes.
5.Turn off.
Applications:
1. Mainly used for road, parking lot, stores, roof, expressway, subway, building.
2. Road toll booth decoration lighting, garden lighting and square,.
3. at the same time can also be used in street lamps, suitable for tunnel lighting.
And so on.
Details: